OPR2101 Overview
These photodiodes are packaged in the Tray to protect them from damage. The photodiodes are put into SMD/SMT packages for safety protection. In reverse-bias mode on a continual basis, the maximum amount of voltage the photodiodes can withstand is 50V. The voltage for the photodiodes should not exceed 50V in reverse-bias mode on a continual basis. The photodiodes have 12 pins. The temperature should not be higher than 125°C when photodiodes operate. But the minimum operating temperature for the photodiodes should be set to -55°C. In the reverse-bias mode, the photodiodes could supply 50V voltage. Even in the absence of light input, a photodiode occurs 5μA current.
OPR2101 Features
Moisture Sensitivity Level (MSL): 4 (72 Hours)
Operating Temperature: -55°C~125°C
Packaging: Tray
Diode Type: PIN
Mount: Surface Mount
Spectral Range: 400nm ~ 1100nm
Responsivity @ nm: 0.45 A/W @ 890nm
OPR2101 Applications
There are a lot of TT Electronics/Optek Technology
OPR2101 Photodiodes applications.
- High speed photo detector
- Infrared remote control
- Infrared data transmission
- Photo interrupters
- Shaft encoders
- Electronic Equipment
- Industrial Automation
- Machine Controls
- Light Barriers
- Vision Controls
