OP905 Overview
The photodiodes are packaged in the Bulk in order to prevent damage to them. It is necessary to enclose the photodiodes in T packages for safety purposes. Continually operating in reverse-bias mode, a photodiode's maximum voltage is 60V. When reverse-biased, the photodiodes should not continually exceed 60V. A photodiode is equipped with 2 pins. A circuit containing photodiodes might release 100mW heat. It is recommended that photodiodes be operated at a temperature of 100°C. In spite of this, the photodiodes should be operated at a minimum operating temperature of -40°C. Photodiodes require an electric potential of 1.2V in order to conduct current. During reverse-bias operation, the photodiodes were able to supply voltage of 60V. Despite the absence of light, photodiodes make 1nA current.
OP905 Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: Through Hole
Spectral Range: 500nm ~ 1100nm
Response Time: 5ns
OP905 Applications
There are a lot of TT Electronics/Optek Technology OP905 Photodiodes applications.
- Measurement Levelling
- Optical Analytics
- Low Cost Light Monitoring
- Optical Switches
- Emitter Alignment
- Heart Rate Monitoring
- Vision Controls
- LiDAR
- Infrared remote control
- YAG laser detection
