OP955 Overview
Photodiodes are enclosed in Bulk to prevent damage. Photodiodes are packaged in Radial packages in order to ensure their safety. Continuous reverse-bias means the photodiodes can withstand only 60V voltage. When reverse-biased, the photodiodes should not continually exceed 60V. Photodiodes have pins 2. There is a possibility that photodiodes could release 100mW heat within a circuit. As a rule of thumb, when photodiodes are operating, the temperature should not exceed 100°C. The minimum operating temperature for the photodiodes, however, should be set to -40°C. When the photodiodes were operated in reverse bias, they would supply the voltage 60V. There is 1nA current flowing through a photodiode even in the absence of light input.
OP955 Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: Through Hole
Spectral Range: 500nm ~ 1100nm
Response Time: 5ns
Viewing Angle: 90°
OP955 Applications
There are a lot of TT Electronics/Optek Technology
OP955 Photodiodes applications.
- Machine Controls
- Light Barriers
- Vision Controls
- Measurement Levelling
- High speed photo detectors
- Health Monitoring
- Heart Rate Monitoring
- Pulse Oximetry
- Pure UV-C Monitoring
- Sterilization Lamp Monitoring
