PD70-01B/TR7 Overview
Tape & Reel (TR) is used to protect the photodiodes from damage. A safety package containing the photodiodes is provided for their protection. When the photodiodes are reverse-biased, the voltage should never exceed 32V. A photodiode has a pin number of 2. There was the possibility that photodiodes in a circuit would emit 150mW heat. The reverse anode voltage for the photodiodes should be 32V. In general, the maximum heat generated by photodiodes should be 150mW in a circuit. With the reverse voltage of 32V, the photodiodes in the DC circuit can work properly. The current in a photodiode is 5nA even when there is no light input.
PD70-01B/TR7 Features
Moisture Sensitivity Level (MSL): 3 (168 Hours)
Operating Temperature: -25°C~85°C
Packaging: Tape & Reel (TR)
Diode Type: PIN
Mount: Surface Mount
Spectral Range: 730nm ~ 1100nm
PD70-01B/TR7 Applications
There are a lot of Everlight Electronics Co Ltd
PD70-01B/TR7 Photodiodes applications.
- Shaft encoders
- Electronic Equipment
- Industrial Automation
- Machine Controls
- Light Barriers
- Vision Controls
- Measurement Levelling
- High speed photo detectors
- Health Monitoring
- Heart Rate Monitoring
