SN74LS173ANSR Overview
The package is in the form of 16-SOIC (0.209, 5.30mm Width). The package Tape & Reel (TR)contains it. As configured, the output uses Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.75V~5.25V. A temperature of 0°C~70°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74LSseries FPGA. You should not exceed 50MHzin the output frequency of the device. In total, there are 1 elements. The number of terminations is 16. The 74LS173 family contains this object. An input voltage of 5Vpowers the D latch. This D flip flop belongs to the family of LS. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. The D latch operates on 5V volts. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. This input has 2lines.
SN74LS173ANSR Features
Tape & Reel (TR) package
74LS series
16 pins
5V power supplies
SN74LS173ANSR Applications
There are a lot of Texas Instruments SN74LS173ANSR Flip Flops applications.
- Buffer registers
- Shift registers
- Circuit Design
- High Performance Logic for test systems
- Matched Rise and Fall
- Modulo – n – counter
- Computing
- Memory
- ESD protection
- Frequency Dividers
