SN74BCT29821DWE4 Overview
24-SOIC (0.295, 7.50mm Width)is the packaging method. You can find it in the Tubepackage. As configured, the output uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at 0°C~70°C TA. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74BCT series. Its output frequency should not exceed 125MHz. D latch consists of 1 elements. This process consumes 10mA quiescents. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. D latch belongs to the 74BCT29821 family. A voltage of 5V is used as the power supply for this D latch. This T flip flop has a capacitance of 5.5pF farads at the input. In terms of electronic devices, this device belongs to the BCT/FBTfamily of devices. Surface Mount mounts this electronic component. The 24pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Normal operation requires a supply voltage (Vsup) above 4.5V. It operates from 5V power supplies. There are 2 ports embedded in the flip flops. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
SN74BCT29821DWE4 Features
Tube package
74BCT series
24 pins
5V power supplies
SN74BCT29821DWE4 Applications
There are a lot of Texas Instruments SN74BCT29821DWE4 Flip Flops applications.
- QML qualified product
- Supports Live Insertion
- Event Detectors
- Test & Measurement
- Data storage
- Memory
- ESD protection
- Guaranteed simultaneous switching noise level
- Convert a momentary switch to a toggle switch
- ATE
