SN74LVC2G74DCUTE4 Overview
The flip flop is packaged in a case of 8-VFSOP (0.091, 2.30mm Width). A package named Tape & Reel (TR)includes it. T flip flop is configured with an output of Differential. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. The supply voltage is set to 1.65V~5.5V. Currently, the operating temperature is -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74LVCseries contain this type of chip. This D flip flop should not have a frequency greater than 140MHz. As a result, it consumes 10μA quiescent current and is not affected by external forces. A total of 8 terminations have been made. The 74LVC2G74 family contains this object. The D flip flop is powered by a voltage of 1.8V . Input capacitance of this device is 5pF farads. A device of this type belongs to the family of LVC/LCX/Z. There is an electronic part mounted in the way of Surface Mount. There are 8pins on it. Its clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. The flip flop is designed with 1bits. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Its superior flexibility is attributed to its use of 1 circuits. Considering the reliability of this T flip flop, it is well suited for TR. The power supply is 3.3V. 2 gates are contained in its basic building block.
SN74LVC2G74DCUTE4 Features
Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
3.3V power supplies
2 gates
SN74LVC2G74DCUTE4 Applications
There are a lot of Texas Instruments SN74LVC2G74DCUTE4 Flip Flops applications.
- Bounce elimination switch
- Instrumentation
- Data Synchronizers
- Computing
- Control circuits
- Storage Registers
- Asynchronous counter
- QML qualified product
- Modulo – n – counter
- Buffered Clock
