CD74ACT574ME4 Overview
SOICis the packaging method. The Rail/Tubepackage contains it. A total of 1elements are present in it. A total of 20terminations have been recorded. A voltage of 5V provides power to the D latch. It belongs to the family of electronic devices known as ACT. There is an electronic part that is mounted in the way of Surface Mount. The 20pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. A total of 5V power supplies are needed to run it. This flip flop has a total of 2ports. Optimal efficiency requires a supply voltage of 5V. In order for the chip to function, it has 3output lines. Quiescent current is consumed by the D latch in the amount of 8μA. A -24mAvalue is set for the high level output current. 24mA is the low level output current. A temperature below 125°Cis recommended for operation. It is recommended that the operating temperature be greater than -55°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. 5.5Vis the maximum supply voltage it supports. We are able to achieve a frequency of 110MHz. The logic IC it uses is BUS DRIVER. As a result, it is equipped with 1 functions . This device is equipped with a pin count of 20. In addition to its maximum design flexibility, the output current of the flip flop is 24mA.
CD74ACT574ME4 Features
Rail/Tube package
20 pins
5V power supplies
1 Functions
20 pin count
CD74ACT574ME4 Applications
There are a lot of Texas Instruments
CD74ACT574ME4 Flip Flops applications.
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
