CD74HC564MG4 Overview
The item is packaged in SOICcases. In total, it contains 1 elements. A total of 20 terminations have been made. A voltage of 4.5V is used to power it. An electronic device belonging to the family HC/UHcan be found here. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TUBE. The D flip flop is embedded with 2ports. It consumes 8μA current. -7.8mAis set as the high level output current. There is no low level output current set at 7.8mA. Temperatures below 125°Care ideal for operating. Temperatures above -55°Cshould be used. The minimum voltage required for operation is 2V. 6Vis the maximum supply voltage supported by it. This can be achieved at a frequency of 60MHz. It uses the logic IC BUS DRIVER. There are 1 functions associated with the JK flip flop. 20pins are provided on the D latch. It features maximum design flexibility due to the 7.8mA output current.
CD74HC564MG4 Features
20 pins
1 Functions
20 pin count
CD74HC564MG4 Applications
There are a lot of Texas Instruments
CD74HC564MG4 Flip Flops applications.
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
- Modulo – n – counter
