SN74ALS574BDWRG4 Overview
SOICis the way it is packaged. It is included in the package Tape & Reel (TR). TTLis the output configured for it. In total, it contains 1 elements. There are 20 terminations,Power is supplied from a voltage of 5V volts. ALSis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. A total of 20pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. It is included in FF/Latches. On the basis of its reliable performance, this D flip flop is well suited for use with TR. The system runs on a power supply of 5V watts. The flip flop has 2ports embedded within it. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. In addition, BROADSIDE VERSION OF 374is a characteristic of it. There is 24mA output current at the high level. There is 2.6mA output current at the low level. It is recommended that the operating temperature be lower than 70°C. A temperature above 0°Cshould be used for the operation. Initially, it requires a voltage of 4.5V as the minimum supply voltage. It is capable of supporting a maximum supply voltage of 5.5V. 35MHzis the maximum frequency that can be achieved. This logic IC is BUS DRIVER. A total of 1 functions are provided by this T flip flop. With 20 pins, it is equipped with a low power consumption. As a result of the output current of 24mA, the design flexibility is maximized.
SN74ALS574BDWRG4 Features
Tape & Reel (TR) package
20 pins
5V power supplies
1 Functions
20 pin count
SN74ALS574BDWRG4 Applications
There are a lot of Texas Instruments
SN74ALS574BDWRG4 Flip Flops applications.
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
