SN74AC74PWG4 Overview
As a result, it is packaged as TSSOP. There are 2 elements in it. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power supply voltage is 3V. It is a member of the ACfamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. Its clock edge trigger type is Positive Edge. The part is included in FF/Latches. The flip flop is designed with 1bits. There are 3.3/5V power supplies attached to it. It is reported that there are 1 input lines. High level output current is set to -24mA. Low level output current is set to 24mA. A temperature below 85°Cshould be used for operation. Ideally, the operating temperature should be greater than -40°C. The minimal supply voltage is 2V. The maximum supply voltage supported by the flip flop is 6V. It is possible to achieve a frequency of 160MHz. It adopts a logic IC of type D FLIP-FLOP. The T flip flop is equipped with 2functions . The JK flip flop has a pin count of 14. 24mA provides maximum design flexibility due to its output current.
SN74AC74PWG4 Features
14 pins
1 Bits
3.3/5V power supplies
2 Functions
14 pin count
SN74AC74PWG4 Applications
There are a lot of Texas Instruments
SN74AC74PWG4 Flip Flops applications.
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
