VBP104SR Overview
These photodiodes are packaged in the Digi-Reel® to protect them from damage. The photodiodes are put into 2-SMD, Z-Bend packages for safety protection. The voltage for the photodiodes should not exceed 60V in reverse-bias mode on a continual basis. The photodiodes have 2 pins. The photodiodes could release 215mW heat within a circuit. The reverse anode voltage for the photodiodes should be 60V. In general, the maximum heat released by the photodiodes should be 215mW in a circuit. In the DC circuit, the photodiodes can work properly with the reverse voltage of 60V. The voltage needed to get current to flow across a photodiode should be 1.3V. The breakdown voltage should be 60V to ensure photodiodes work. Even in the absence of light input, a photodiode occurs 2nA current.
VBP104SR Features
Moisture Sensitivity Level (MSL): 3 (168 Hours)
Operating Temperature: -40°C~100°C
Packaging: Digi-Reel®
Diode Type: PIN
Mount: PCB, Surface Mount
Spectral Range: 430nm ~ 1100nm
Viewing Angle: 130°
VBP104SR Applications
There are a lot of Vishay Semiconductor Opto Division
VBP104SR Photodiodes applications.
- High speed photo detector
- Infrared remote control
- Infrared data transmission
- Photo interrupters
- Shaft encoders
- Electronic Equipment
- Industrial Automation
- Machine Controls
- Light Barriers
- Vision Controls
