UCC5622MWPTRG4 Overview
A 27 termination consists of terminating transmission lines with a device matching the line's characteristic impedance. The 44-BSOP (0.295, 7.50mm Width) is well known in the electronic industry due to its low package cost. The Packaging follows Tape & Reel (TR)'s materials. Mounting it on a PCB is done with Surface Mount. It is recommended that the Operating Temperature not exceed 0°C~70°C. It is a SCSI-qualified material for standard applications. For finding related parts, you can use Base Part Number UCC5622. It is intended to use the 44 pins for a specific purpose. There are 27 signal lines, which mean those lines for public or private signal or communication service and devoted exclusively to the transmission of signals or intelligence. The Supply Voltage should be maintained at 4.75V for high efficiency. There is a Surface Mount-mount on it. Computers and other communications devices use 44 pins, which are pronged contacts. In order to operate, 5V Power Supplies are required. Resistance is a measure of the opposition to current flow in an electrical circuit. The resistance of this electrical device is 110Ohm (Ω). A current supply must be provided to 7V so that it can function properly.
UCC5622MWPTRG4 Features
27 terminations
Tape & Reel (TR) package
UCC5622 family
44 pin count
27 signal lines
44 pins
5V power supplies
UCC5622MWPTRG4 Applications
There are a lot of Texas Instruments
UCC5622MWPTRG4 Signal Terminators applications.
- Data Networking
- CSU and DSU
- Data Routers
- Programmable logic controller
- Remote input module
- Data Networking
- PCI Cards
- Telecommunication Equipment
- Data Routers
- Data Switches
