UCC5617DWPG4 Overview
A 18 termination consists of terminating transmission lines with a device matching the line's characteristic impedance. The 28-SOIC (0.295, 7.50mm Width) is well known in the electronic industry due to its low package cost. The Packaging follows Tube's materials. It is mounted in the way of Surface Mount. It is recommended that the Operating Temperature not exceed 0°C~70°C. It is a SCSI-qualified material for standard applications. For finding related parts, you can use Base Part Number UCC5617. It is intended to use the 28 pins for a specific purpose. There are 18 signal lines, which mean those lines for public or private signal or communication service and devoted exclusively to the transmission of signals or intelligence. The Supply Voltage should be maintained at 4.75V for high efficiency. There is a Surface Mount-mount on it. Computers and other communications devices use 28 pins, which are pronged contacts. In order to operate, 5V Power Supplies are required. Resistance is a measure of the opposition to current flow in an electrical circuit. The resistance of this electrical device is 110Ohm (Ω). To fully function, 440mA needs a supply current. The system runs on a minimal supply voltage of 4V. When 5.25V is maximal, it operates at maximum voltage. The maximal current supplied for its operation reaches 440mA.
UCC5617DWPG4 Features
18 terminations
Tube package
UCC5617 family
28 pin count
18 signal lines
28 pins
5V power supplies
UCC5617DWPG4 Applications
There are a lot of Texas Instruments
UCC5617DWPG4 Signal Terminators applications.
- Data Networking
- CSU and DSU
- Data Routers
- Programmable logic controller
- Remote input module
- Data Networking
- PCI Cards
- Telecommunication Equipment
- Data Routers
- Data Switches
