CD74FCT273M96 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). D flip flop is embedded in the Tape & Reel (TR) package. T flip flop uses Non-Invertedas its output configuration. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 4.75V~5.25V is required for operation. In this case, the operating temperature is 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. JK flip flop is a part of the 74FCTseries of FPGAs. Its output frequency should not exceed 70MHz Hz. The element count is 1 . T flip flop consumes 8μA quiescent energy. Terminations are 20. The 74FCT273family includes it. The D flip flop is powered by a voltage of 5V . Input capacitance of this device is 10pF farads. An electronic device belonging to the family FCTcan be found here. In this case, the electronic component is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. The design is based on 8bits. There is a 5.25Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be kept above 4.75V. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. An electrical current of 5V volts is applied to it. It is reported that there are 8 input lines.
CD74FCT273M96 Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CD74FCT273M96 Applications
There are a lot of Texas Instruments CD74FCT273M96 Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Cold spare funcion
- ESD performance
- Clock pulse
- Differential Individual
- Frequency Dividers
- Supports Live Insertion
- Automotive
- Event Detectors
- EMI reduction circuitry
