74LCX574MTR Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tape & Reel (TR). T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 2V~3.6V. It is at -55°C~125°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74LCXseries FPGA. Its output frequency should not exceed 150MHz. The list contains 1 elements. Despite external influences, it consumes 10μAof quiescent current. Currently, there are 20 terminations. D latch belongs to the 74LCX574 family. A voltage of 2.7V is used to power it. A 6pFfarad input capacitance is provided by this T flip flop. In terms of electronic devices, this device belongs to the LVC/LCX/Zfamily of devices. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. Its clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It is designed with 8bits. The supply voltage (Vsup) should be maintained above 2V for normal operation. The superior flexibility is achieved through the use of 8 circuits. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. The flip flop has 2ports embedded within it. It operates with 3 output lines.
74LCX574MTR Features
Tape & Reel (TR) package
74LCX series
20 pins
8 Bits
74LCX574MTR Applications
There are a lot of STMicroelectronics 74LCX574MTR Flip Flops applications.
- Parallel data storage
- ESD performance
- Bounce elimination switch
- Latch-up performance
- Automotive
- 2 – Bit synchronous counter
- Consumer
- Event Detectors
- Storage Registers
- Synchronous counter
