CD74HCT109MG4 Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. The package Tubecontains it. Differentialis the output configured for it. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. A temperature of -55°C~125°C TAis considered to be the operating temperature. There is JK Type type of electronic flip flop associated with this device. FPGAs belonging to the 74HCTseries contain this type of chip. Its output frequency should not exceed 54MHz. 16terminations have occurred. The 74HCT109family includes it. Power is supplied from a voltage of 5V volts. This T flip flop has a capacitance of 10pF farads at the input. A device of this type belongs to the family of HCT. In this case, the electronic component is mounted in the way of Surface Mount. The 16pins are designed into the board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This RS flip flops is a part number FF/Latches. 2 circuits are used to achieve its superior flexibility. An electrical current of 5V volts is applied to it. In order to achieve high efficiency, the supply voltage should be maintained at 5V. In terms of quiescent current, it consumes 4μA .
CD74HCT109MG4 Features
Tube package
74HCT series
16 pins
5V power supplies
CD74HCT109MG4 Applications
There are a lot of Texas Instruments CD74HCT109MG4 Flip Flops applications.
- Dynamic threshold performance
- Pattern generators
- Balanced Propagation Delays
- Test & Measurement
- Frequency Dividers
- ATE
- Asynchronous counter
- Registers
- Data transfer
- Convert a momentary switch to a toggle switch
