CD74AC374M96E4 Overview
As a result, it is packaged as SOIC. The package Tape & Reel (TR)contains it. There are 1 elements in it. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power supply voltage is 3.3V. It is a member of the ACfamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. Its clock edge trigger type is Positive Edge. The part is included in FF/Latches. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. There are 2 ports embedded in the flip flops. It is designed with 3 output lines. As a result, it consumes 8μA of quiescent current without being affected by external factors. High level output current is set to -24mA. Low level output current is set to 24mA. A temperature below 125°Cshould be used for operation. Ideally, the operating temperature should be greater than -55°C. The minimal supply voltage is 1.5V. The maximum supply voltage supported by the flip flop is 5.5V. It is possible to achieve a frequency of 125MHz. It adopts a logic IC of type BUS DRIVER. The T flip flop is equipped with 1functions . The JK flip flop has a pin count of 20. 24mA provides maximum design flexibility due to its output current.
CD74AC374M96E4 Features
Tape & Reel (TR) package
20 pins
1 Functions
20 pin count
CD74AC374M96E4 Applications
There are a lot of Texas Instruments
CD74AC374M96E4 Flip Flops applications.
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
