CD4027BMG4 Overview
SOICis the way it is packaged. In total, it contains 2 elements. There are 16 terminations,Power is supplied from a voltage of 5V volts. The electronic part is mounted in the way of Surface Mount. A total of 16pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. Flip flops designed with 2bits are used in this part. On the basis of its reliable performance, this D flip flop is well suited for use with TUBE. There are 1 output lines on it. Despite external influences, it consumes 20μAof quiescent current. There is -4.2mA output current at the high level. There is 4.2mA output current at the low level. It is recommended that the operating temperature be lower than 125°C. A temperature above -55°Cshould be used for the operation. Initially, it requires a voltage of 3V as the minimum supply voltage. It is capable of supporting a maximum supply voltage of 18V. 24MHzis the maximum frequency that can be achieved. This logic IC is J-K FLIP-FLOP. A total of 2 functions are provided by this T flip flop. With 16 pins, it is equipped with a low power consumption.
CD4027BMG4 Features
16 pins
2 Bits
2 Functions
16 pin count
CD4027BMG4 Applications
There are a lot of Texas Instruments
CD4027BMG4 Flip Flops applications.
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
