CD74HC107M96G4 Overview
It is packaged in the way of SOIC. D latch consists of 2 elements. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is powered from a supply voltage of 4.5V. This D flip flop belongs to the family of HC/UH. This electronic part is mounted in the way of Surface Mount. It is designed with 14 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Negative Edge. This part is included in FF/Latches. This flip flop is designed with 2 Bits. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 4μA of quiescent current without being affected by external factors. The high level output current is set to -5.2mA. The low level output current is set to 5.2mA. The operating temperature should be lower than 125°C. The operating temperature should be higher than -55°C. It operates with the minimal supply voltage of 2V. It supports the maximal supply voltage of 6V. The frequency that can be achieved is 60MHz. The logic IC it adopts is J-K FLIP-FLOP. It is equipped with 2 Functions . It is equipped with 14 pin count. The output current of 5.2mA makes it feature maximum design flexibility.
CD74HC107M96G4 Features
14 pins
2 Bits
2 Functions
14 pin count
CD74HC107M96G4 Applications
There are a lot of Texas Instruments
CD74HC107M96G4 Flip Flops applications.
- Digital electronics systems
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
