SN74HC574DBRG4 Overview
The package is in the form of SSOP. The element count is 1 . 20terminations have occurred. It is powered by a voltage of 5V . A device of this type belongs to the family of HC/UH. It is mounted in the way of Surface Mount. There are 20pins on it. The clock edge trigger type for this device is Positive Edge. A reliable performance of this D flip flop makes it well suited for use in TR. The flip flop contains 2ports. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. A high level output current of -7.8mAis set. In the low level output current setting, the current is set to 7.8mA. Ideally, the operating temperature should be below 85°C. If the operating temperature is higher than -40°C, the system should operate properly. In order for it to operate, a supply voltage of 2Vis required. A maximum voltage of 6V can be provided by it. This frequency can be achieved at 40MHz. There is a logic IC BUS DRIVER used in the D flip flop. It has 1 functions. 20pins are available on this JK flip flop. With an output current of 7.8mA, this flip flop offers maximum design flexibility.
SN74HC574DBRG4 Features
20 pins
1 Functions
20 pin count
SN74HC574DBRG4 Applications
There are a lot of Texas Instruments
SN74HC574DBRG4 Flip Flops applications.
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
