BQ2002TPN Overview
There is a package for Tube in which it can be found.We've included it in the 8-DIP (0.300, 7.62mm) package so that it's easier to use.Mounting type for the device is Through Hole.It is recommended that the temperature be set to 0°C~70°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of POWER SUPPLY SUPPORT CIRCUIT must be used.The device requires Constant Pulsed current to charge.The related parts of the base part number BQ2002 can be found by following the order of the base part number.It contains a total of 8 terminations.As far as the battery pack is concerned, it is 2V.It is equipped with 8 pins.There are various programmable features, such as Voltage.It requires pins 8 to function.The number of available channels is 1.It should be able to run off a battery of 5V.In order for the device to operate properly, the supply voltage should not exceed 6V.In this case, the output current of the device is set to 2A.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.A supply voltage of 4V is suitable for it, because it can operate with a low supply voltage.Vsup (maximum supply voltage) is set in the command to 0.5mA.The part's power supply is set to a value of 5V.A minimum input voltage of 4V volts is required for this device.Its supply carries 500μA current.The best efficiency can be achieved by setting the supply voltage to 5V.
BQ2002TPN Features
Battery pack voltage of 2V
1 channels
Power Management Circuits subcategory
8-DIP (0.300, 7.62mm) package
BQ2002TPN Applications
There are a lot of Texas Instruments
BQ2002TPN Battery Chargers ICs applications.
- Golf carts
- Forklift
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
- Material handling
- Man lift
