BQ2000TSN-B5 Overview
I found it in the Tube package, which comes with everything you need.The package 8-SOIC (0.154, 3.90mm Width) includes a version of it.A Surface Mount mounting type is assigned to the device.If the temperature is set to -20°C~70°C TA, reliable performance will be assured.A analog IC of POWER SUPPLY SUPPORT CIRCUIT has been used in the design of this device.Device charging requires Constant - Programmable current.The base part number BQ2000 represents its related parts.As far as the terminations are concerned, there are 8.The device has 8 pins in total.Features such as Current, Timer, Voltage are programmable.You need 8 pins for it to work.Channels are available in a total of 1.Using a 5V battery should be enough to run it.As long as the supply voltage is 6V, it is capable of withstanding the voltage.Using a 5.8V output voltage results in high efficiency.There is a constant output current of 2A when it is operating.The device you are looking at belongs to the subcategory of Power Management Circuits.The device can operate at as low a supply voltage as possible, such as 4V.It was determined during the design process that Vsup (maximum supply voltage) should be set to 1mA.A power supply setting of 0 has been assigned to the part.As far as the input voltage is concerned, it has a minimum of 4V volts.The supply of the gadget is running with 500μA current.It is recommended to set the supply voltage to 5V in order to maximize the efficiency of the system.300kHz switching frequency is used by the part.
BQ2000TSN-B5 Features
1 channels
Power Management Circuits subcategory
Switching frequency of 300kHz
8-SOIC (0.154, 3.90mm Width) package
BQ2000TSN-B5 Applications
There are a lot of Texas Instruments
BQ2000TSN-B5 Battery Chargers ICs applications.
- Forklift
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
- Material handling
- Man lift
- Boat
