LT1513IR#PBF Overview
There is an Tube package that contains it. The TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package includes it as a convenience.Mounting type is Surface Mount.It is recommended to set the temperature to -40°C~125°C TJ for reliable performance.It uses an analog integrated circuit of type BATTERY CHARGE CONTROLLER.For the device to be charged, there is Constant - Programmable current required.Parts related to the base part number LT1513 can be found based on that number.It contains 7 terminations.The battery pack has 20V Max.There are 7 pins on it.It operates on the basis of 7 pins.25V is the maximum supply voltage for the device.Battery voltage should be 5V.A 29V supply voltage can be applied to it.High efficiency can be achieved with a 20V output voltage.There is 2A output current when the device operates.There is a subcategory of Power Management Circuits for this device.The device can operate at a voltage of 2.7V as low as possible.5.5mA is set for Vsup (maximum supply voltage).There is 5V power supply set for the part.Voltage input must be at least 2.4V volts.Input voltage is 5V.The maximum input voltage is 30V volts.A switching frequency of 580kHz is the maximum for the part.To fulfill the operation requirements, the maximum output supply voltage is reduced to 20V.To meet operation conditions, the maximum output current is reduced to 5A.
LT1513IR#PBF Features
Battery pack voltage of 20V Max
Power Management Circuits subcategory
TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package
LT1513IR#PBF Applications
There are a lot of Linear Technology/Analog Devices
LT1513IR#PBF Battery Chargers ICs applications.
- Fast charge
- Fleet management
- Shop charger
- Golf carts
- Forklift
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
