BQ24160ARGER Overview
There is a version of it included in the package Tape & Reel (TR).With this item, there is a 24-VFQFN Exposed Pad package that comes with it.In this case, the device has a mounting type of Surface Mount.This is the right thing to do: set the temperature to -40°C~85°C TA.In order to operate, the device relies on an analog IC named POWER SUPPLY MANAGEMENT CIRCUIT.In order to charge the device, it needs to receive Constant - Programmable current.By using the base part number BQ24160, related parts can be found for this device.The overall number of terminations that can be found in it is 24 as a whole.It is set to 3.7V for the battery pack.The device indicates 2.5A charging current as its maximum.For the product to work correctly, 24 pins are required, and a connection to each pin is required.This application has a total of 1 channels that can be used.Batteries with 5V can be used to power it.As long as the output voltage is set to 4.44V, then there is a possibility of optimal efficiency being achieved.2.5A is the output current during the operation.The device you are looking at belongs to the subcategory of Power Management Circuits.It is mounted in the manner of Surface Mount.It was determined during the design process that Vsup (maximum supply voltage) should be set to 5mA.It is recommended to set the supply voltage to 10V in order to maximize the efficiency of the system.1.5MHz switching frequency is used by the part.If the supply voltage (Vsup) is kept above 4.2V, the device will be able to operate normally.
BQ24160ARGER Features
Battery pack voltage of 3.7V
1 channels
Power Management Circuits subcategory
Switching frequency of 1.5MHz
24-VFQFN Exposed Pad package
BQ24160ARGER Applications
There are a lot of Texas Instruments
BQ24160ARGER Battery Chargers ICs applications.
- Forklift
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
- Material handling
- Man lift
- Boat
