SI5335B-B09091-GMR Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. There is a clock generator embedded in the 24-VFQFN Exposed Pad package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result, frequency synthesizers can be found to contain 24 terminations. Basically, this time clock generator needs a voltage of 1.8V. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 1.98V for this clock generator. There are CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs integrated into this digital clock generator. For safety reasons, this frequency generator's supply voltage should remain above 1.71V. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. With this clock-generating device, a high-quality clock output frequency of 200MHz can be produced. Temperatures below -40°C could result in this clock PLL failing to start up. A frequency synthesizer with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY features better clock signal output.
SI5335B-B09091-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335B-B09091-GMR Applications
There are a lot of Silicon Labs SI5335B-B09091-GMR Clock Generators applications.
- Clock signals to the high-speed Digital RF circuits
- Signal analyzer
- Small signal recovery
- Deep space exploration
- Electronic equipment
- Frequency synthesis
- Microprocessor clock multipliers
- Televisions
- Wide area power system
- Picocells, femtocells and small cells
