SI5335D-B07953-GMR Overview
Tape & Reel (TR)-method packaging is used for clock ICs. 24-VFQFN Exposed Pad contains this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result, frequency synthesizers can be found to contain 24 terminations. This electronic frequency generator requires a voltage of 1.8V. PLL clock is mounted in the way of Surface Mount. This clock generator would require a maximum supply voltage of 1.98V. The uPs/uCs/Peripheral IC clock generator incoporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. For safety reasons, this frequency generator's supply voltage should remain above 1.71V. If the frequency generator's operating temperature exceeds 85°C, it may pose a ha85°Card. For the clock, clock generator's output frequency should not exceed 200MHz. Unless the ambient temperature is greater than -40°C, this clock PLL may not start. The RF synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for improved clock signal output.
SI5335D-B07953-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B07953-GMR Applications
There are a lot of Silicon Labs SI5335D-B07953-GMR Clock Generators applications.
- Ultrasound diagnosis
- Signal frequency synthesis circuits
- Bit synchronization
- FPGA and processor clocks
- Deep space exploration
- Test and instrumentation equipment
- Frequency shifting decodes
- Medical equipment
- Radio receivers
- Electronic countermeasures
