PN2907TA Overview
In this device, the DC current gain is 100 @ 150mA 10V, which is calculated by taking the ratio of the base current to collector current and dividing transistor by two.The collector emitter saturation voltage is 1.6V, giving you a wide variety of design options.Single BJT transistor means that Ic is at Single BJT transistors maximum value (saturated), so the vce saturation(Max) is equal to 1.6V @ 50mA, 500mA.Continuous collector voltages of 800mA should be maintained to achieve high efficiency.Keeping the emitter base voltage at -5V can result in a high level of efficiency.According to definition, current rating describes the maximum current a fuse can carry indefinitely without deteriorating too much, and this device has no current rating.In extreme cases, the collector current can be as low as 800mA volts.
PN2907TA Features
the DC current gain for this device is 100 @ 150mA 10V
a collector emitter saturation voltage of 1.6V
the vce saturation(Max) is 1.6V @ 50mA, 500mA
the emitter base voltage is kept at -5V
the current rating of this device is -800mA
PN2907TA Applications
There are a lot of ON Semiconductor PN2907TA applications of single BJT transistors.
- Inverter
- Muting
- Driver
- Interface
