NB2308AC1HDG Overview
Tube-method packaging is used for clock ICs. A Clock PLL is included with the 16-SOIC (0.154, 3.90mm Width) package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. It contains 16 terminations that can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. In this clock generator, Clock is used as the input to the clock. 1 circuits are used to achieve clock PLL's superior flexibility. 133.3MHz is the maximal value for normal operation. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. There are 3V~3.6V available for use with this clock PLL. Using the test statistics, we estimate that the ambient temperature should be 0°C~70°C. It has been classified as a Zero Delay Buffer electronic part, which means that it is a semiconductor. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. According to the base part number NB2308A, its related parts can be found. PLL is designed with 16 pins. RF synthesizers can handle voltages up to 3.3V. Low timing skew is provided by this analog clock generator at maximum 0.2 ns. Analog clock generator is configured with 8 pins that enable the high true output.
NB2308AC1HDG Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs
NB2308AC1HDG Applications
There are a lot of ON Semiconductor NB2308AC1HDG Clock Generators applications.
- Mixed mode (analog and digital) applications
- Clock generation systems
- Small signal recovery
- Signal generator
- Peripheral devices
- Digital logic circuits
- Microwave backhaul IF
- Digital HDTV systems
- Clock signals to the high-speed Digital RF circuits
- VSAT (Small Ground Satellite Station)
