MC74LCX574MEL Overview
The flip flop is packaged in 20-SOIC (0.209, 5.30mm Width). Package Tape & Reel (TR)embeds it. Currently, the output is configured to use Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electric part mounted in the way of Surface Mount. Powered by a 2V~3.6Vvolt supply, it operates as follows. In this case, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. The FPGA belongs to the 74LCX series. Its output frequency should not exceed 150MHz. In total, it contains 1 elements. Despite external influences, it consumes 10μAof quiescent current. 20terminations have occurred. The 74LCX574 family contains this object. Power is supplied from a voltage of 3.3V volts. Its input capacitance is 7pF farads. An electronic device belonging to the family LVC/LCX/Zcan be found here. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. This flip flop is designed with 8 Bits. The supply voltage (Vsup) should be maintained above 2V for normal operation. Its superior flexibility is attributed to its use of 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The flip flop has 2embedded ports. It has 3 output lines to operate.
MC74LCX574MEL Features
Tape & Reel (TR) package
74LCX series
20 pins
8 Bits
MC74LCX574MEL Applications
There are a lot of ON Semiconductor MC74LCX574MEL Flip Flops applications.
- Buffered Clock
- Differential Individual
- Computers
- Latch-up performance
- Modulo – n – counter
- Safety Clamp
- Functionally equivalent to the MC10/100EL29
- Frequency Divider circuits
- Shift registers
- Control circuits
