M74HC374B1R Overview
It is packaged in the way of 20-DIP (0.300, 7.62mm). It is included in the package Tube. Tri-State, Non-Invertedis the output configured for it. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Through Hole. The supply voltage is set to 2V~6V. It is operating at -55°C~125°C TA. It is an electronic flip flop with the type D-Type. It belongs to the 74HCseries of FPGAs. A frequency of 90MHzshould be the maximum output frequency. In total, it contains 1 elements. As a result, it consumes 4μA quiescent current. A total of 20terminations have been recorded. Members of the M74HC374family make up this object. A voltage of 4.5V is used as the power supply for this D latch. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is a member of the HC/UHfamily of D flip flop. A part of the electronic system is mounted in the way of Through Hole. As you can see from the design, it has pins with 20. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. An electronic part with 8bits has been designed. Vsup reaches its maximum value at 6V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. The superior flexibility of this circuit is achieved by using 8 circuits. In order for the device to operate, it requires 2/6V power supplies. The flip flop has 2embedded ports. Featuring the maximum design flexibility, it has an output current of 7.8mA . It has 3 output lines to operate.
M74HC374B1R Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
M74HC374B1R Applications
There are a lot of STMicroelectronics M74HC374B1R Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Data transfer
- Memory
- Modulo – n – counter
- EMI reduction circuitry
- Power down protection
- Cold spare funcion
- Data Synchronizers
- Control circuits
- Balanced 24 mA output drivers
