74LVC1G175GW,165 Overview
The flip flop is packaged in a case of 6-TSSOP, SC-88, SOT-363. There is an embedded version in the package Tape & Reel (TR). The output it is configured with uses Non-Inverted. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 1.65V~5.5V. In the operating environment, the temperature is -40°C~125°C TA. This D latch has the type D-Type. FPGAs belonging to the 74LVCseries contain this type of chip. There should be no greater frequency than 200MHzon its output. In total, there are 1 elements. Despite external influences, it consumes 10μAof quiescent current. There are 6 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74LVC1G175family includes it. Power is provided by a 2.7V supply. A 2.5pFfarad input capacitance is provided by this T flip flop. It is a member of the LVC/LCX/Zfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. This board has 6 pins. This device has the clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. This flip flop is designed with 1 Bits. 5.5Vis the maximum supply voltage (Vsup). In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. A total of 3.3V power supplies are needed to run it.
74LVC1G175GW,165 Features
Tape & Reel (TR) package
74LVC series
6 pins
1 Bits
3.3V power supplies
74LVC1G175GW,165 Applications
There are a lot of Nexperia USA Inc. 74LVC1G175GW,165 Flip Flops applications.
- Storage registers
- Asynchronous counter
- Data storage
- Count Modes
- Single Down Count-Control Line
- Power down protection
- Buffered Clock
- Computers
- Common Clocks
- Automotive
