MC10EL35DR2G Overview
It is packaged in the way of 8-SOIC (0.154, 3.90mm Width). It is contained within the Tape & Reel (TR)package. As configured, the output uses Differential. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. With a supply voltage of -4.2V~-5.7V volts, it operates. In this case, the operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. It belongs to the 10ELseries of FPGAs. You should not exceed 2.2GHzin the output frequency of the device. As a result, it consumes 32mA of quiescent current without being affected by external factors. Terminations are 8. JK flip flop belongs to 10EL35 family. The power source is powered by 5V. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 8 pins. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. Flip flops designed with 2bits are used in this part. There is a 5.7Vmaximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 4.2V. The superior flexibility of this circuit is achieved by using 1 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. A power supply of -5.2Vis required to operate it. Furthermore, it has NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vas a characteristic.
MC10EL35DR2G Features
Tape & Reel (TR) package
10EL series
8 pins
2 Bits
-5.2V power supplies
MC10EL35DR2G Applications
There are a lot of ON Semiconductor MC10EL35DR2G Flip Flops applications.
- Balanced 24 mA output drivers
- Patented noise
- Common Clocks
- Memory
- Balanced Propagation Delays
- Dynamic threshold performance
- Matched Rise and Fall
- CMOS Process
- QML qualified product
- Differential Individual
