M74LCX16374DTR2G Overview
48-TFSOP (0.173, 4.40mm Width)is the packaging method. D flip flop is included in the Tape & Reel (TR)package. The output it is configured with uses Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Surface Mountmounts this electrical part. A supply voltage of 2V~3.6V is required for operation. -55°C~125°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74LCXseries FPGA. In order for it to function properly, its output frequency should not exceed 170MHz. There are 2 elements in it. T flip flop consumes 10μA quiescent energy. A total of 48 terminations have been made. This D latch belongs to the family of 74LCX16374. A voltage of 2.5V is used to power it. This D flip flop belongs to the family of LVC/LCX/Z. It is mounted in the way of Surface Mount. There are 48pins on it. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. An electronic part with 16bits has been designed. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The D flip flop is embedded with 2ports. Featuring the maximum design flexibility, it has an output current of 24mA . In order for the chip to function, it has 3output lines. It consumes 20μA of quiescent current without being affected by external factors.
M74LCX16374DTR2G Features
Tape & Reel (TR) package
74LCX series
48 pins
16 Bits
M74LCX16374DTR2G Applications
There are a lot of ON Semiconductor M74LCX16374DTR2G Flip Flops applications.
- Power down protection
- Storage registers
- Buffer registers
- Data Synchronizers
- Shift registers
- High Performance Logic for test systems
- Buffered Clock
- Frequency division
- Count Modes
- Control circuits
