MC100EP35DTG Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)is the packaging method. It is included in the package Tube. It is configured with Differentialas an output. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. Powered by a -3V~-5.5Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. There is JK Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 100EP series. You should not exceed 3GHzin the output frequency of the device. The number of terminations is 8. If you search by 100EP35, you will find similar parts. A voltage of 3.3V is used as the power supply for this D latch. It is mounted in the way of Surface Mount. A total of 8pins are provided on this board. Its clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. There are 2bits in its design. As soon as 5.5Vis reached, Vsup reaches its maximum value. A normal operating voltage (Vsup) should remain above 3V. In light of its reliable performance, this T flip flop is well suited for RAIL. A power supply of -4.5Vis required to operate it. It is designed with 1 output lines. It is also characterized by NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V. A high level output current of -50mAis set. In the low level output current setting, the current is set to 50mA.
MC100EP35DTG Features
Tube package
100EP series
8 pins
2 Bits
-4.5V power supplies
MC100EP35DTG Applications
There are a lot of ON Semiconductor MC100EP35DTG Flip Flops applications.
- Differential Individual
- Parallel data storage
- Automotive
- Frequency Dividers
- Patented noise
- Buffered Clock
- Data storage
- Bounce elimination switch
- High Performance Logic for test systems
- Single Down Count-Control Line
