HEF40175BT,653 Overview
As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). It is contained within the Tape & Reel (TR)package. It is configured with Differentialas an output. There is a trigger configured with Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 3V~15V volts. In this case, the operating temperature is -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 4000B series. Its output frequency should not exceed 45MHz. In total, it contains 1 elements. This process consumes 4μA quiescents. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The object belongs to the 40175 family. Power is provided by a 5V supply. A JK flip flop with a 7.5pFfarad input capacitance is used here. In this case, the electronic component is mounted in the way of Surface Mount. The 16pins are designed into the board. There is a clock edge trigger type of Positive Edgeon this device. It is designed with a number of bits of 4. Keeping the supply voltage (Vsup) above 3V is necessary for normal operation. This input has 4lines in it.
HEF40175BT,653 Features
Tape & Reel (TR) package
4000B series
16 pins
4 Bits
HEF40175BT,653 Applications
There are a lot of Nexperia USA Inc. HEF40175BT,653 Flip Flops applications.
- Individual Asynchronous Resets
- Set-reset capability
- QML qualified product
- Cold spare funcion
- ESD performance
- Frequency Dividers
- Automotive
- Shift Registers
- Test & Measurement
- Communications
