SN74ALS374AN Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. Tri-State, Non-Invertedis the output configured for it. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Through Hole. It operates with a supply voltage of 4.5V~5.5V. 0°C~70°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74ALSseries contain this type of chip. A frequency of 35MHzshould be the maximum output frequency. There are 1 elements in it. Despite external influences, it consumes 19mAof quiescent current. Terminations are 20. If you search by 74ALS374, you will find similar parts. Power is supplied from a voltage of 5V volts. ALSis the family of this D flip flop. There is an electronic part that is mounted in the way of Through Hole. 20pins are included in its design. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. The flip flop is designed with 8bits. Using 8 circuits, it is highly flexible. An electrical current of 5V volts is applied to it. A total of 2ports are embedded in the D flip flop. High efficiency requires the supply voltage to be maintained at 5V. It offers maximum design flexibility with its output current of 24mA. It is reported that there are 3 input lines.
SN74ALS374AN Features
Tube package
74ALS series
20 pins
8 Bits
5V power supplies
SN74ALS374AN Applications
There are a lot of Texas Instruments SN74ALS374AN Flip Flops applications.
- Latch
- Storage registers
- Balanced 24 mA output drivers
- Functionally equivalent to the MC10/100EL29
- Instrumentation
- Shift registers
- Registers
- Modulo – n – counter
- Differential Individual
- Storage Registers
