Name: 74LVC2G66GD,125
Brand: Nexperia USA Inc.
SKU: 74LVC2G66GD,125
Price: 0.14000 USD
Availability: InStock

new-10%

74LVC2G66GD,125

Manufacturer part number:74LVC2G66GD,125

Manufacturer:Nexperia USA Inc.

Description:3.9ns, 5ns SPST - NO 10Ohm DUAL Analog Switches 74LVC2G66 8 Pins 5μA 2.7V 8-XFDFN

Case Package:SOT-23

Datasheet:74LVC2G66GD,125 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-XFDFN
Number of Pins	8
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	15Ohm
Terminal Finish	NICKEL PALLADIUM GOLD
Subcategory	Multiplexer or Switches
Max Power Dissipation	250mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.5mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	74LVC2G66
Output	SEPARATE OUTPUT
Pin Count	8
Operating Supply Voltage	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	200μA
Nominal Supply Current	100nA
Power Dissipation	250mW
Max Supply Current	200μA
Throw Configuration	SPST
Turn On Delay Time	4.6 ns
Number of Inputs	2
Supply Type	Single
Turn-Off Delay Time	3.8 ns
-3db Bandwidth	500MHz
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	46 dB
Current - Leakage (IS(off)) (Max)	5μA
Channel Capacitance (CS(off), CD(off))	5pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	3.9ns, 5ns
Charge Injection	7.5pC
Crosstalk	-56dB @ 1MHz
Switch-on Time-Max	13ns
Switch-off Time-Max	11.5ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NO
Height Seated (Max)	0.5mm
Length	3mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free

74LVC2G66GD,125 Product Details

74LVC2G66GD,125 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-XFDFN. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature extended to -40°C~125°C TA. A total of 8 terminations have been recorded. This electronic part offers high-quality output due to its 1 channels. It is safe to turn on and run the electronic component with a 2.7V voltage supply. Into the electrical component body are injected 8 pins. SPST - NO switching circuits are used in these analog switch ics. Try searching with 74LVC2G66 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 15Ohm. To find out what the 8 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 1.65V. For this digital switch to work, 200μA current would suffice. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. Putting voltage greater than 200μA on the multiplexer may cause damage. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. There is a voltage range of 5V operating voltages for the electrical part. Operating 2 inputs is required.