SN74LVC2G53DCTRE4 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-LSSOP, 8-MSOP (0.110, 2.80mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 8 terminations. This electronic part offers high-quality output due to its 2 channels. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. There are 8 pins injected into the electronic part body. The analog switch ics are built using SPDT switching circuits. A total of 1 circuits make up this switch device. Search with 74LVC2G53 if you are looking for analog multiplexer variants. It has an internal resistance of 13Ohm. The functions of 8 pins can be found in the datasheets. There is a standard Multiplexers or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Single supply type digital switch with a low cost. 1.65V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 1μA. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 1μA. The analog switch ics has 2 outputs.
SN74LVC2G53DCTRE4 Features
2 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 300MHz
SN74LVC2G53DCTRE4 Applications
There are a lot of Texas Instruments
SN74LVC2G53DCTRE4 Analog Switches & Multiplexers ICs applications.
- Isolation
- Medical
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
