Name: MAX4526ESA
Brand: Maxim Integrated
SKU: MAX4526ESA
Price: 5.01000 USD
Availability: InStock

new-10%

MAX4526ESA

Manufacturer part number:MAX4526ESA

Manufacturer:Maxim Integrated

Description:SPDT 175Ohm Analog Switches BREAK-BEFORE-MAKE MAX4526 8 Pins 500pA 15V 8-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:MAX4526ESA Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1997
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	175Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	471mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	15V
[email protected] Reflow Temperature-Max (s)	20
Base Part Number	MAX4526
Pin Count	8
Operating Supply Voltage	20V
Polarity	Non-Inverting
Power Supplies	+-15V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	4.5V
Analog IC - Other Type	SPST
Operating Supply Current	700μA
Nominal Supply Current	50nA
Max Supply Current	1mA
Voltage - Supply, Single/Dual (±)	4.5V~36V ±4.5V~18V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Max Dual Supply Voltage	20V
On-State Resistance (Max)	175Ohm
Min Dual Supply Voltage	4.5V
High Level Output Current	20mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	13pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SPDT
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	0.1ns
Switch-off Time-Max	0.1ns
Height Seated (Max)	1.75mm
Length	4.9mm
Width	3.9mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant

MAX4526ESA Product Details

MAX4526ESA Overview

Due to its 8-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tube. It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Extended operating temperature around -40°C~85°C TA. 8 terminations have been made so far. A electrical component with 1 channels is capable of high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. The electrical component body receives 8 pins. A SPDT switching circuit is used to build these analog multiplexers. It consists of 2 circuits. Look for analog switch ic variants by searching with MAX4526. Analog switches have 175Ohm internal resistance. To find out what the functions of 8 pins are, please refer to their datasheets. This switch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 36V. An effective Dual, Single supply digital multiplexer. It is recommended to use 4.5V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 700μA. If put voltage greater than 1mA on the device, damage may be caused to the analogue multiplexer. Despite this switch device's dual supply capability, its voltage should not exceed 20V. When using dual power supplies, you should attach at least 4.5V. Integrated with an analog IC SPST. A voltage of 20V can be used to operate the electronic component.