CD74HC4066M96 Overview
Shipping overseas is convenient with the electronic component packed in 14-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Cut Tape (CT). Mounted in Surface Mount is this multiplexer. 1:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -55°C~125°C TA. Totally, there are 14 terminations. Due to its 4 channels, the electrical component produces high-quality output. An 4.5V voltage supply should allow the electrical part to be turned on and run. A total of 14 pins are injected into the body of the electronic part. SPST - NO switching circuits are used in these analog switch ics. Use 74HC4066 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 70Ohm. Datasheets for functions of 14 pins are available. In this analog multiplexer, the value is Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 10V. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 2V. Using a single voltage supply, this switch device consumes 2V~10V volts. The switch multiplexer may be damaged if it is exposed to voltage greater than 40μA. There are 200MHz bandwidths for data transfer. A Drain to Source resistance of 70Ohm is shown for this electronic part.
CD74HC4066M96 Features
4 Channels
Switch Circuit: SPST - NO
Bandwidth: 200MHz
Drain-to-Source resistance: 70Ohm
CD74HC4066M96 Applications
There are a lot of Texas Instruments CD74HC4066M96 Analog Switches & Multiplexers ICs applications.
- Multiplexers
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- ISDN NT1/TA
- SONET/SDH ADM
- SDH/SONET multiplexers
- Battery Powered Instruments
- DSUs
- Cable Modem
- Fiber In The Loop (FITL)
- Audio and video routing
