MCP6561UT-E/OT Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail, TTL is being used.We ship the part through Tape & Reel (TR) .As you can see, the comparator has5 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 1.8V voltage.In general, the chip type can be classified as General Purpose .A total of 1 elements can be found in it.A total of 5 pins are included.A Surface Mount mounting type is recommended.A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 5 pins.Alternatively, you may search for MCP6561U to find more pin-to-pin solutions for your specific needs.There is 130μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is possible to input a maximum of 1pA current into the device.For normal operation, there should be 5V operating supply voltage applied.The device is acceptable to pack by TR .
MCP6561UT-E/OT Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6561UT-E/OT Applications
There are a lot of Microchip Technology
MCP6561UT-E/OT linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
