MCP6564-E/ST Overview
In order to make transportation easier, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail, TTL is being used.We ship the part through Tube .As you can see, the comparator has14 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 1.8V voltage.In general, the chip type can be classified as General Purpose .A total of 4 elements can be found in it.A total of 14 pins are included.A Surface Mount mounting type is recommended.A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 14 pins.Alternatively, you may search for MCP6564 to find more pin-to-pin solutions for your specific needs.There is 130μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 130μA .A current supply greater than 130μA may cause the comparator to malfunction.The device can be run with 2/5V power supplies.Electronic comparator is possible to input a maximum of 1pA current into the device.
MCP6564-E/ST Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6564-E/ST Applications
There are a lot of Microchip Technology
MCP6564-E/ST linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
