TS864IDT Overview
For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .There is a Push-Pull output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 14 terminals.The electrical component here belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as General Purpose .Electronic comparator consists of 4 elements in total.Electronic comparator has 14 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator has a pin count of 14 .You can find more pin-to-pin solutions by searching TS864 .As a result, this comparator displays a quiescent current of 16μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 56μA when using the device.A supply current exceeding 56μA may result in the comparator malfunctioning.There is sufficient power to run the device from 2.7/10V power supplies.You can input a maximum current of 300pA into this device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 240dB .
TS864IDT Features
Push-Pull output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB
TS864IDT Applications
There are a lot of STMicroelectronics
TS864IDT linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
