ALD2321BPCL Overview
Electronic comparator is packaged in 16-DIP (0.300, 7.62mm) for convenient transportation.This comparator is of the CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output type.Ready for shipping in Tube package.Speaking of types, this is a typical General Purpose comparator.This is a 2 element comparator.Through Hole universial mout for easy adapting.The operating temperature should be set to 0°C~70°C to avoid mal-function.The comparator has 16 pins.This comparator presents a quiescent current of 180μA .Electronic comparator has a Through Hole for mounting on PCB or other boards.For normal use of the device, the nominal supply current should be 180μA .Current supply exceeding 180μA could cause disfunction of the compartator.The maximal current your can input into the device is 20pA .Temperature higher than 70°C is not recommended.Temperature lower than 0°C is not suitable for the it.The maximal supply voltage of the comparator is 10V .This comparator allows minimum supply voltage of 3V .2 channels cooperate together to maintain the output quality.The part is from EPAD® comparator series.
ALD2321BPCL Features
CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
ALD2321BPCL Applications
There are a lot of Advanced Linear Devices Inc.
ALD2321BPCL linear comparators applications.
- Mobile Communications
- Notebooks and PDAs
- Battery-Powered Electronics
- General-Purpose Portable Devices
- General-Purpose, Low-Voltage Applications
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
