Name: MAX396CWI+T
Brand: Maxim Integrated
SKU: MAX396CWI+T
Availability: InStock

new-10%

MAX396CWI+T

Manufacturer part number:MAX396CWI+T

Manufacturer:Maxim Integrated

Description:150ns, 150ns 100Ohm Analog Switches BREAK-BEFORE-MAKE MAX396 28 Pins 100pA 5V 28-SOIC (0.295, 7.50mm Width)

Case Package:SOT-23

Datasheet:MAX396CWI+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-SOIC (0.295, 7.50mm Width)
Number of Pins	28
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	1W
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	MAX396
Pin Count	28
Operating Supply Voltage	15V
Number of Channels	16
Number of Circuits	1
Max Supply Voltage	16V
Min Supply Voltage	2.7V
Operating Supply Current	60nA
Propagation Delay	150 ns
Turn On Delay Time	500 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	2.7V~16V ±2.7V~8V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	400 ns
Max Dual Supply Voltage	8V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	16:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	11pF 80pF
On-state Resistance Match-Nom	1.8Ohm
Switch Time (Ton, Toff) (Max)	150ns, 150ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	1.8 Ω
Crosstalk	-92dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.03A
Height Seated (Max)	2.65mm
Width	7.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX396CWI+T Product Details

MAX396CWI+T Overview

This electronic part is conveniently packaged in 28-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 16:1 is the number of circuits in the multiplexer and demultiplexer. Around 0°C~70°C TA is the extended operating temperature. Totally, there are 28 terminations. The electronic part delivers high-quality output through its 16 channels. A 5V voltage supply should turn on and run the electronic component. As part of its design, the 28 series is equipped with this electronic component. A 1 circuit is present in this switch device. Use MAX396 to search for variants of the digital switches. In this multiplexer, the internal resistance is 100Ohm. To find out what the functions of 28 pins are, please refer to their datasheets. normally, users should not supply switches with voltages higher than 16V. The digital multiplexer has a low cost Dual, Single supply. A low voltage of 2.7V should be applied to the electronic component. For this multiplexer to operate, 60nA current would be sufficient. Despite this switch device's dual supply capability, its voltage should not exceed 8V. For dual power supplies, a voltage of at least 3V should be attached. A voltage of 15V can be used to operate the electronic component.