Name: MAX339EEE+
Brand: Maxim Integrated
SKU: MAX339EEE+
Availability: InStock

new-10%

MAX339EEE+

Manufacturer part number:MAX339EEE+

Manufacturer:Maxim Integrated

Description:500ns, 500ns SP4T 400Ohm Analog Switches MAX339 16 Pins 20pA 15V 16-SSOP (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:MAX339EEE+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SSOP (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2012
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	400Ohm
Max Power Dissipation	666.7mW
Technology	CMOS
Terminal Form	GULL WING
Number of Functions	2
Supply Voltage	15V
Terminal Pitch	0.635mm
Base Part Number	MAX339
Pin Count	16
Operating Supply Voltage	20V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	30V
Min Supply Voltage	4.5V
Operating Supply Current	1μA
Propagation Delay	200 ns
Turn On Delay Time	500 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	4.5V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	500 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	400Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	20pA
Channel Capacitance (CS(off), CD(off))	3pF 6pF
On-state Resistance Match-Nom	4Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	500ns, 500ns
Charge Injection	1.5pC
Channel-to-Channel Matching (ΔRon)	4 Ω
Crosstalk	-92dB @ 100kHz
Switch-on Time-Max	650ns
Switch-off Time-Max	650ns
Height Seated (Max)	1.75mm
Width	3.89mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX339EEE+ Product Details

MAX339EEE+ Overview

Due to its 16-SSOP (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Temperatures around -40°C~85°C TA are extended for operation. 16 terminations have been made so far. A high-quality output is provided by the electrical component's 4 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. A SP4T switching circuit is used to build these analog multiplexers. 2 circuits are used in this analogue multiplexer. Using the MAX339 search parameter, you can discover variants of the switch. This digital multiplexer has 400Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. Users shouldn't supply more than 30V voltage to the switch device. Analog switch ics with Dual, Single supply type are cost-effective. 4.5V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 1μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 20V. The voltage should be at least 4.5V if you are using dual power supplies. This electrical part is compatible with 20V operating voltages.