DG381AAK/883B Overview
Presented in 14-CDIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Through Hole is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -55°C~125°C TA. Totally, there are 14 terminations. A high-quality output is provided by the electrical component's 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. A total of 14 pins are injected into the electrical part body. A SPST - NC switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 2. In this multiplexer, the internal resistance is 50Ohm. For details about the functions of 14 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 36V to the switch device in normal circumstances. 10V is the lowest voltage the electrical component should receive. Putting voltage greater than 500μA on the multiplexer may cause damage. There is no problem with using dual supply voltage, but it should not exceed 18V. With dual power supplies, you should attach at least 5V. It is integrated with a SPDT analog IC. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. The electrical part can be operated at 15V voltage levels.
DG381AAK/883B Features
1 Channels
Switch Circuit: SPST - NC
DG381AAK/883B Applications
There are a lot of Maxim Integrated
DG381AAK/883B Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- New designs requiring multiplexer functions
- Cellular phones
