MPC506APG4 Overview
The electrical component comes in 28-DIP (0.600, 15.24mm) packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tube. Through Hole is where this multiplexer is located. 16:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. 28 terminations have been made so far. The electronic part provides high-quality output because it has 16 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. This electronic part can be found in the 28 series. A total of 1 circuits make up this switch device. Try searching with MPC506 to find analog multiplexer variants. This digital multiplexer has 1.5kOhm internal resistance. To find out what the 28 pins do, please refer to the datasheets. An effective Dual supply digital multiplexer. An operating current of 700μA would be sufficient for this switch device. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. If you are using a dual power supply, you should attach at least 5V. It can operate from 22V operating voltages. Operating the 16 inputs requires 16 inputs.
MPC506APG4 Features
16 Channels
700μA Supply Current
MPC506APG4 Applications
There are a lot of Texas Instruments MPC506APG4 Analog Switches & Multiplexers ICs applications.
- DSUs
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Public switching systems
- Multi-Line E1 Interface Cards
- Avionics test equipment
- Mechanical reed relay replacement
- Precision test equipment
- Audio signal routing
- Communication systems
- USB 1.1 signal switching circuits
