Name: DG407DN-T1-E3
Brand: Vishay Siliconix
SKU: DG407DN-T1-E3
Price: 9.81000 USD
Availability: InStock

new

DG407DN-T1-E3

Manufacturer part number:DG407DN-T1-E3

Manufacturer:Vishay Siliconix

Description:200ns, 150ns 100Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG407 28 Pins 500pA 15V 28-LCC (J-Lead)

Case Package:SOT-23

Datasheet:DG407DN-T1-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	12 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Number of Pins	28
Weight	1.182714g
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
Resistance	100Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	450mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Reach Compliance Code	unknown
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	DG407
Pin Count	28
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	44V
Min Supply Voltage	7.5V
Operating Supply Current	30μA
Nominal Supply Current	50μA
Power Dissipation	450mW
Max Supply Current	500μA
Propagation Delay	350 ns
Turn On Delay Time	600 ns
Logic Function	Multiplexer
Number of Inputs	16
Voltage - Supply, Single/Dual (±)	12V ±5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	300 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	69 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	8pF 65pF
On-state Resistance Match-Nom	5Ohm
Switch Time (Ton, Toff) (Max)	200ns, 150ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	400ns
Drain to Source Resistance	50Ohm
Signal Current-Max	0.03A
Height	3.69mm
Length	12.57mm
Width	12.57mm
RoHS Status	ROHS3 Compliant

DG407DN-T1-E3 Product Details

DG407DN-T1-E3 Overview

This electronic part is conveniently packaged in 28-LCC (J-Lead), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. 28 terminations have been made so far. As a result of its 8 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. It is part of the design of the 28 series that this electronic component is included. A total of 2 circuits make up this switch device. Search with DG407 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 100Ohm. For functions related to 28 pins, please refer to the datasheets. Users shouldn't supply more than 44V voltage to the switch device. Analog switch ics with Dual, Single supply type are cost-effective. 7.5V is the lowest voltage that should be fed to the electronic electronic part. 30μA current would be enough for this multiplexer to operate. It may damage the digital multiplexer if the voltage is higher than 500μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. When using dual power supplies, you should attach at least 5V. The electronic component can function from 15V. In order to operate the 16 inputs, there are several steps to follow. The Drain to Source resistance of this electronic component is 50Ohm.